Standards covered by the ENEC Agreement

according to PD ENEC 301 Annex B - October 2009

NOTE:

Of all Standards listed in this Annex, the latest ratified editions and amendments shall be taken into account.

During the transitional period ENEC licences may be granted according to an old standard, or a standard which is being superseded,
until 3 months before the date of withdrawal (dow). See OD ECS 012 (former OD CIG 012) for details.

Ref. (GrCod)	Standard	Product	Limitations *)	Evaluation factory- location (PD ENEC 308)	Location Testing Laboratory **)
					Europe **)	World-wide
E1	EN 60598-1	Luminaires	yes, see note to item 1	1), 2), 3)	X
E1.1	EN 60598-2-1	Fixed general purpose luminaires	no	1), 2), 3)	X
E1.2	EN 60598-2-2	Recessed luminaires	no	1), 2), 3)	X
E1.3	EN 60598-2-3	Luminaires for road and street lighting	no	1), 2), 3)	X
E1.4	EN 60598-2-4	Portable general purpose luminaires	no	1), 2), 3)	X
E1.5	EN 60598-2-5	Flood lights	no	1), 2), 3)	X
E1.6	EN 60598-2-6	Luminaires with built-in transformer for filament lamps	no	1), 2), 3)	X
E1.7	EN 60598-2-7	Portable luminaires for garden use	yes, see note to item 1.7	1), 2), 3)	X
E1.8	EN 60598-2-8	Hand lamps	no	1), 2), 3)	X
E1.9	EN 60598-2-9	Photo and film luminaires (non-professional)	no	1), 2), 3)	X
E1.10	EN 60598-2-10	Portable child appealing luminaires	no	1), 2), 3)	X
E1.11	EN 60598-2-11	Aquarium luminaires	no	1), 2), 3)	X
E1.12	EN 60598-2-12	Mains socket-outlet mounted night lights	no	1), 2), 3)	X
E1.13	EN 60598-2-13	Ground recessed luminaires	no	1), 2), 3)	X
E1.17	EN 60598-2-17	Luminaires for stage lighting television and filmstudios (outdoor and indoor)	no	1), 2), 3)	X
E1.18	EN 60598-2-18	Luminaires for swimming pools and similar application	no	1), 2), 3)	X
E1.19	EN 60598-2-19	Air-handling luminaires (safety requirements)	no	1), 2), 3)	X
E1.20	EN 60598-2-20	Lighting chains	no	1), 2), 3)	X
E1.22	EN 60598-2-22	Luminaires for emergency lighting	yes, see note to item 1.22	1), 2), 3)	X
E1.23	EN 60598-2-23	Extra low-voltage lighting systems for filament lamps	no	1), 2), 3)	X
E1.24	EN 60598-2-24	Luminaires with limited surface temperatures	no	1), 2), 3)	X
E1.25	EN 60598-2-25	Luminaires for use in clinical areas of hospitals and health care buildings	no	1), 2), 3)	X
E2	void
E3	void
E4	void
E5	void
E6	void
E7	EN 60155	Starters for tubular fluorescent lamps	no	1), 2), 3)	X
E8	EN 61048 EN 61049	Capacitors for use in tubular fluorescent and other discharge lamp circuits - Safety requirements - Performance requirements	no	1), 2), 3)		X
E9	EN 60238	Edison lampholders	no	1), 2), 3)	X
E10	EN 60400	Fluorescent lampholders	no	1), 2), 3)	X
E11	EN 60838-1	Miscellaneous lampholders	no	1), 2), 3)	X
E12	void
E13	EN 61184	Bayonet lampholders	no	1), 2), 3)	X
E14	void
E15	EN 60570	Electrical supply track systems for luminaires	yes, see note to item 15	1), 2), 3)	X
E15.1	void
E16	void
E16.1	EN 60950-1	Information technology equipment – Safety Part 1: General requirements	no	1), 2), 3), 4)		X
E17	EN 60968 EN 60969	Self-ballasted lamps for general lighting services - Safety requirement - Performance requirements	no	1), 2), 3)	X
E18	EN 61050	Transformers for tubular discharge lamps having a no-load output voltage exceeding 100 V (neon transformers)	no	1), 2), 3)	X
E19	EN 61558-1	Safety of power transformers, power supply units and similar	no	1), 2), 3), 4)		X
E19.1	EN 61558-2-1	Particular requirements for separating transformers for general use	no	1), 2), 3), 4)		X
E19.2	EN 61558-2-2	Particular requirements for control transformers	no	1), 2), 3), 4)		X
E19.4	EN 61558-2-4	Particular requirements for isolating transformers for general use	no	1), 2), 3), 4)		X
E19.5	EN 61558-2-5	Particular requirements for shaver transformers and shaver supply units	no	1), 2), 3), 4)		X
E19.6	EN 61558-2-6	Particular requirements for safety isolating transformers for general use	no	1), 2), 3), 4)		X
E19.7	EN 61558-2-7	Particular requirements for transformers for toys	no	1), 2), 3), 4)		X
E19.8	EN 61558-2-17	Particular requirements for transformers for switch mode power supplies	no	1), 2), 3), 4)		X
E20	EN 61058-1	Switches for appliances	no	1), 2), 3), 4)		X
E20.1	EN 61058-2-1	Particular requirements for cord switches	no	1), 2), 3), 4)		X
E20.2	EN 61058-2-5	Particular requirements for change-over selectors	no	1), 2), 3), 4)		X
E21	EN 60730-1	Automatic electrical controls for household and similar use	no	1), 2), 3), 4)		X
E21.1	EN 60730-2-1	Particular requirements for electrical controls for electrical household appliances	no	1), 2), 3), 4)		X
E21.2	EN 60730-2-2	Particular requirements for thermal motor protectors	no	1), 2), 3), 4)		X
E21.3	EN 60730-2-3	Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps	no	1), 2), 3), 4)		X
E21.4	EN 60730-2-4	Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type	no	1), 2), 3), 4)		X
E21.5	EN 60730-2-5	Particular requirements for automatic electrical burner control systems	no	1), 2), 3), 4)		X
E21.6	EN 60730-2-6	Particular requirements for automatic electrical pressure sensing controls, including mechanical requirements	no	1), 2), 3), 4)		X
E21.7	EN 60730-2-7	Particular requirements for timers and time switches	no	1), 2), 3), 4)		X
E21.8	EN 60730-2-8	Particular requirements for electrically operated water valves, including mechanical requirements	no	1), 2), 3), 4)		X
E21.9	EN 60730-2-9	Particular requirements for temperature sensing controls	no	1), 2), 3), 4)		X
E21.10	EN 60730-2-10	Particular requirements for motor starting relays	no	1), 2), 3), 4)		X
E21.11	EN 60730-2-11	Particular requirements for energy regulators	no	1), 2), 3), 4)		X
E21.12	EN 60730-2-12	Particular requirements for electrically operated door locks	no	1), 2), 3), 4)		X
E21.13	EN 60730-2-13	Particular requirements for humidity sensing controls	no	1), 2), 3), 4)		X
E21.14	EN 60730-2-14	Particular requirements for electric actuators	no	1), 2), 3), 4)		X
E21.15	EN 60730-2-15	Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications	no	1), 2), 3), 4)		X
E21.16	EN 60730-2-16	Particular requirements for automatic electrical water level operating controls of the float type for household and similar applications	no	1), 2), 3), 4)		X
E21.18	EN 60730-2-18	Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements	no	1), 2), 3), 4)		X
E22	void
E23	void
E24	EN 60998-1	Connecting devices for low voltage circuits for household and similar purposes. Part 1: General requirements	yes, see note to item 24	1), 2), 3)		X
E24.1	EN 60998-2-1	Particular requirements for connecting devices as separate entities with screw-type clamping units	yes, see note to item 24	1), 2), 3)		X
E24.2	EN 60998-2-2	Particular requirements for connecting devices as separate entities with screw-less-type clamping units	yes, see note to item 24	1), 2), 3)		X
E24.3	EN 60998-2-3	Particular requirements for connecting devices as separate entities with insulation piercing clamping units	yes, see note to item 24	1), 2), 3)		X
E25	EN 60999-1	Connecting devices – Electrical copper conductors	yes, see note to item 25	1), 2), 3)		X
E26	EN 60938-2	Fixed inductors for electromagnetic interference suppression Part 2: Sectional specification	no	1), 2), 3)		X
E27	EN 61347-1	Lamp controlgear Part 1: General and safety requirements	no	1), 2), 3)	X
E27.1	EN 61347-2-1 EN 60927	Lamp controlgear – Particular requirements for starting devices (other than glow starters) Starting devices (other than glow starters) - Performance requirements	no	1), 2), 3)	X
E27.2	EN 61347-2-2 EN 61047	Lamp controlgear – Particular requirements for DC or AC supplied electronic step-down convertors for filament lamps DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements	no	1), 2), 3)	X
E27.3	EN 61347-2-3 EN 60929	Lamp controlgear – Particular requirements for AC supplied electronic ballasts for fluorescent lamps AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements	no	1), 2), 3)	X
E27.4	EN 61347-2-4 EN 60925	Lamp controlgear – Particular requirements for DC supplied electronic ballasts for general lighting DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements	no	1), 2), 3)	X
E27.5	EN 61347-2-5 EN 60925	Lamp controlgear – Particular requirements for DC supplied electronic ballasts for public transport lighting DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements	no	1), 2), 3)	X
E27.6	EN 61347-2-6 EN 60925	Lamp controlgear – Particular requirements for DC supplied electronic ballasts for aircraft lighting DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements	no	1), 2), 3)	X
E27.7	EN 61347-2-7	Lamp controlgear – Particular requirements for DC supplied electronic ballasts for emergency lighting This standard also includes operational requirements for ballasts which are regarded as performance requirements (Clause 1 of 61347-2-7:2006)	no	1), 2), 3)	X
E27.8	EN 61347-2-8 EN 60921	Lamp controlgear – Particular requirements for ballasts for fluorescent lamps Ballasts for tubular fluorescent lamps - Performance requirements	no	1), 2), 3)	X
E27.9	EN 61347-2-9 EN 60923	Lamp controlgear – Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements	no	1), 2), 3)	X
E27.10	EN 61347-2-10	Lamp controlgear – Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)	no	1), 2), 3)	X
E27.11	EN 61347-2-11	Lamp controlgear – Particular requirements for miscellaneous electronic circuits used with luminaires	no	1), 2), 3)	X
E27.12	EN 61347-2-12	Lamp controlgear – Particular requirements for DC or AC supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)	no	1), 2), 3)	X
E27.13	EN 61347-2-13 EN 62384	Lamp controlgear – Particular requirements for DC or AC supplied electronic control gear for LED modules – Safety requirements DC or AC supplied electronic control gear for LED modules - Performance requirements	no	1), 2), 3)	X
E28	EN 60320-1	Appliance couplers for household and similar purposes	no	1), 2), 3), 4)		X
E28.1	EN 60320-2-1	Sewing machine couplers	no	1), 2), 3), 4)		X
E28.2	EN 60320-2-2	Interconnection couplers for household and similar equipment	no	1), 2), 3), 4)		X
E28.3	EN 60320-2-3	Appliance couplers with a degree of protection higher than IPX0	no	1), 2), 3), 4)		X
E28.4	EN 60320-2-4	Couplers dependent on appliance weight for engagement	no	1), 2), 3), 4)		X
E29	EN 50075	Flat non-rewirable two-pole plugs, 2,5 A 250 V, with cord	yes, see note to item 29	1), 2), 3), 4)		X
E30.1	EN 60309-1	Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements	no	1), 2), 3)		X
E30.2	EN 60309-2	Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories	no	1), 2), 3)		X
E31	EN 60384-14	Fixed capacitors for electromagnetic interference suppression and connection to the supply mains	yes, see note to item 31	1), 2), 3), 4)		X
E32	EN 60939-2	Passive filter units for which safety tests are appropriate - Test methods and general requirements	yes, see note to item 32	1), 2), 3), 4)		X
E33	EN 60335-1	Household and similar electrical appliances - General requirements	see note to item 33	1), 2), 3), 4), 5)		X
E33.2	EN 60335-2-2	Vacuum cleaners and water suction	see note to item 33	1), 2), 3), 4), 5)		X
E33.3	EN 60335-2-3	Electric irons	see note to item 33	1), 2), 3), 4), 5)		X
E33.4	EN 60335-2-4	Spin extractors	see note to item 33